This shows up because you get the arm-tone 3 beeps for 3 cell lipo and a slur-up note yet the motor will not run. Can I safely just pick the item that “should” work ok, and expect it to do so? I’ve watched the Vid Dont rush your build take your time, you will enjoy the flights more as you know the amount of time and effort you spent in getting bird airworthy. They work well and allow the motors to turn up well, but they seem to give out and start having problems such as intermittent connections and eventual failure. Sign up now to remove ads between posts. Visit Nitro Blast’s homepage! Posted April 24, edited.
Good to have a spare then I can swap bits out until I find out where the issue lies. By gavinc , April 23, in Helicopters. Havent had a problem after original parameter programming. Find More Posts by motoguy. Share this post Link to post Share on other sites. I plan to dig it out and put in a quality one, but I wanted to see if I could save this one. I’ve used a few of these on some of my planes.
Last edited by Radbuster; at Find More Posts by Insomniac. Going to order another receiver today. Bought 5 of these and one by one they quit working.
They are much cheaper than their 4channel alternatives and more readily available. Sign up for a new account in our community. Find More Posts by Blue Note. I did that on purpose because it is hard to do 25-03a a TRX plug with one hand: The Turnigys are of course the easiest with the cheap little programming card they sell.
Hobbyking SS Series 40-50A ESC (Opto only)
Mine is also connected directly to the flight battery using a Y cable so there is no extra RX battery to haul around. They work 52-30a and allow the motors to turn up well, but they seem to give out and start having problems such as intermittent connections and eventual failure. Find More Posts by gramps Go To Topic Listing Helicopters. Can I safely just pick the item that “should” work ok, and expect it to do so?
Remember Me Forgot Password? Must be either the motor the esc or the receiver that is faulty I ordered another motor and plush 30a esc today to see if it is the motor or the esc.
Hobbyking SS Series A ESC | RCModelScout
All did the things. Even when you turn your Tx back on ,,,the Rx will still flash but slower to let you know that it had lost it’s bind. Posted April 23, Find More Posts by Live2Fly. The arm tone is put out when it thinks it is at min throttle. Find More Posts by Nitro Blast. Turn off your TxThe Rx should go in to fail safe mode if it has a safe mode Bobbyking are working fine, about a year now.
Apr 24, Moniters all your cells during flight, works with the programming card, doesn’t get hot though I am only using it at about 30A peak.
Originally Posted by dogwood Jan 16, Jan 08, Find More Posts by richgrow. Scratching my head, but my new motor, esc, esc programming card and receiver will arrive tomorrow.
Hobbyking SS Series 190-200A ESC
Return to Multirotor Drone Talk. I’ve also used their cheaper towerpro ESCs a couple of times The last one I’ve used was a little Throttlee brand 12A controller Wondering if the receiver is faulty or doesnt like my tx and that flashing light is indicating that it can’t determine the throttle and thus arm itself.
Quote message in reply? I got my easy star from hobby people, which is ran by hobby king. Originally Posted by Live2Fly. Find More Posts by Grasshopper.
I will move onto something else when I have run out of the ones I have on hand.