HP 7500 SWITCH SERIES IRF CONFIGURATION GUIDE

Represents a routing-capable device, such as a router or Layer 3 switch. Connecting physical IRF ports When you connect two neighboring IRF members, connect the physical ports of IRF-port 1 on one member to the physical ports of IRF-port 2 on the other, as shown in Figure Follow these guidelines on selecting transceiver modules and cables: Page 34 Figure 12 Recovering the IRF fabric If the Active-state fabric has failed, for example, because of device or link failures, before the IRF link is recovered see Figure 13 , use the mad restore command on the Recovery-state fabric to change its state to Active to take over. Summary of Contents for HP series Page 1: Page 31 Configuration Guide. Be sure you fully understand its impact on your live network. Saving the converted configuration file to the main board succeeded.

Italic Italic text represents arguments that you replace with actual values. Page 19 – Saving configuration to the next-startup Change the operating mode of Device A to standalone. Multi-active devices detected, please fix it. The default member priority is 1. You must place a switch in standalone mode before renumbering it in one of the following two situations: The recovery procedure differs depends on whether a two-MPU member switch is available. Square brackets enclose syntax choices keywords or arguments that are optional.

Configuration is saved to device successfully. The current configuration is saved to the active main board successfully.

Page 32 Step Command Remarks Return to system view. HP Series Installation Manual pages.

Nothing herein should be construed as constituting an additional warranty. Summary of Contents for HP series Page conciguration A four-chassis IRF fabric is formed. Saving the converted configuration file succeeded.

  ZEVAR MOVIE 1987

Page 31 Configuration Guide.

You must place a switch in standalone mode before renumbering it in one of the following two situations: Create a dynamic aggregate interface. HP Switch Quickspecs 84 pages. Configuring the global load sharing mode Step Command Remarks Enter system view.

Got it, continue to print. Page 39 [Sysname] interface bridge-aggregation 2 [Sysname-Bridge-Aggregation2] link-aggregation mode dynamic [Sysname-Bridge-Aggregation2] mad enable You need to assign a domain ID range: Configurtaion storageworks fabric os 6. By pressing ‘print’ button you will print only current page.

HP SERIES CONFIGURATION MANUAL Pdf Download.

Accessing the IRF fabric: Requires an intermediate HP downstream device. This section assumes that the failed member switch is Switch A. The assigned domain ID is: Saving the converted configuration file to the main board succeeded. Square brackets enclose syntax choices keywords or arguments that are optional.

Page of 60 Go. Connecting Physical Irf Ports Task Command Save the current configuration to save [ safely ] [ force ] the next-startup configuration file.

Comments to this Manuals Your Name: Page 59 Network topology icons Represents a generic network device, such as a router, switch, or firewall. Page 34 Figure 12 Recovering the IRF fabric If configurration Active-state fabric has failed, for example, because of device or link failures, before the IRF link is recovered see Guode 13use the mad restore command on the Recovery-state fabric to change its state to Active to take over.

Figure 16 Network diagram The intermediate device transparently forwards the extended LACPDUs received from one member switch to all the other member switches: Don’t have an account? Be sure you fully understand its impact on your live network. All settings you made are automatically propagated to the IRF members.

  SAAS BINA SASURAL EPISODE 295

Table of Contents Add to my manuals Add.

HP 7500 series Configuration Manual

Setup and configuration task list HP recommends the following IRF fabric setup and configuration procedure: The auto reboot function enables the IRF fabric to automatically reboot all its member switches to complete the merge. Connecting physical IRF ports When you connect two neighboring IRF members, connect the physical ports of IRF-port 1 on one member to the physical ports of IRF-port 2 on the other, as shown in Figure Follow these guidelines on selecting transceiver modules and cables: Change the operating mode of Device A to standalone.

Now rebooting, please wait To print the manual completely, please, download it. Log in to Device D. Command conventions Convention Description Boldface Bold text represents commands and wsitch that you enter literally as shown.

Enter text from picture: Also See for series High availability command reference – pages Installation manual – pages Datasheet – 28 pages.